All the parts needed to make your 818 perform at its highest level.


VCP K-Tuned shifter $650 + shipping      Fits 5 and 6 Speed Transmissions
Tighten up the shifting on your 818 with a precision billet aluminum shifter with rear facing cables that are half the length of the FFR cables. Comes with shifter, cables, shifter and cable mounts. Shift knob optional ($79)  Specify 5 or 6 speed trans.

VCP Air to Water Intercooler kit  with either BOV or BPV $1399 + shipping 
Add the best protection for your engine by keeping the intake air temperature in check. Especially important on cars running the stock ECU since it measures air temp before the turbo and intercooler and the ECU can not protectect the motor from detonation.
Kit comes with intercooler, heat exchanger, silicone hoses, Tbolt clamps, connectors, hoses, fittings, mounts, intercooler pump, choice of BPV or BOV, and all hardware.

VCP Wide Wheel Trailing Arms $255 + shipping
Allow the use of 9.5" wide rear wheels .

818S Stand Alone car harness with ECU $2150 +shipping
Don't want to deal with that 46 lb. octopus of a harness from your donor car? This is what you need. ECU and harness end up weighing 14 lbs. I havest a few key connectors from your harness and graft them into a brand new harness. Pair that up with your choice of Electromotive TEC-S or MegaSquirt3Pro ECU.

NOTE:06-07 donors require conversion to cable throttle bodies.

818R Stand Alone car harness with ECU $2150 +shipping
Don't want to deal with that 46 lb. octopus of a harness from your donor car? This is what you need. I havest a few key connectors from your harness and graft them into a brand new harness. Pair that up with your choice of Electromotive TEC-S or MegaSquirt3Pro ECU. Comes with a switch panel for your dash and deletes the key switch and turn signals.

NOTE:06-07 donors require conversion to cable throttle bodies.
killer B Subaru WRX / STi Performance ULTIMATE Oil Pickup $172 + shipping
This ULTIMATE OIL PICKUP  uses a .12” thick double bracket, 3X OEM oil pickup tube thickness and a brace between bracket and oil pickup tube to further strengthen the assembly. This is a super duty, engineered solution. No other vendor has anything this rugged available, although I’m sure it will be copied. You asked for it, so here it is. Fits all EJ25 motors


Killer B Subaru WRX / STi EJ25 High Capacity Racing Oil Pan    $459 + shipping
Our V2 Performance Oil pan is designed to reliably meet the demands of high performance Subaru Engines used on street or track applications. Oil Pan holds an extra  1.4 quarts of oil,  +30% increase in capacity over OEM. Optimal Oil Pan was designed to work with our Ultimate Oil Pickup (OEM ones are known to break), but can be modified to work with the OEM pickup.
Killer B Subaru WRX / STi High Performance Oil Baffle / Windage Tray  $78 + shipping
Features and Advantages of the Killer B Motorsport Windage Tray / Baffle over the OEM piece.

• Closed rear section to prevent oil from sloshing into the crank under hard acceleration and aggressive shifts.
• Block contoured profile to minimize oil returning from the heads interfering with the crank.
• Directional louvers prevent oil in the pan from splash/sloshing into the crank.
• Low profile design to control windage and strip oil from the crank immediately to reduce oil “roping” on the crank.
• Improved oil entry to the pan/pickup to help prevent oil starvation.
• Made from stainless steel for long life, durability and corrosion resistance.